Drain Connector / Suction Side
Overview
We recommend that all of the systems which will be serviced with a FlowGuard™ product have the same connection type and sizes. We also recommend that the suction side have a different size connector than the pressure side. This ensures that the two never get connected incorrectly. Place the larger connector on the drain (suction) side and the smaller on the fill (pressure) side.
- Example:
- Filter Cart: 3/4″ ISO-B coupler on suction side, 1/2″ ISO-B coupler on pressure side
- Reservoir breather adapter kit: 3/4″ ISO-B plug on drain port, 1/2″ ISO-B plug on fill port
Please remember to select the same connector type and sizes when ordering our breather adapter kits.
Flush Face
The best quick disconnect and also most expensive. This coupling is easy to wipe-off and offers minimum leakage.
ISO B
A Very common coupling and also least expensive. This coupling meets ISO 7241-1 Series B standards.
ISO A
Common coupling but is not interchangeable with ISO-B couplings. This coupling meets ISO 7241-1 Series A standards.
Wand
A 3/4″ by 42″ long tube which is inserted into a reservoir or container for drawing out or delivering fluid. Although this method is the most common, it introduces unnecessary contamination and creates fluid spills.
Threaded End
This option includes a hose end fitting with a pipe thread. The user supplies a connection type of his/her choice.